Belden Hirschmann SPIDER SL Series, User Manual

Page: 26 / 40

26
Installation SPIDER-SL
Release 06 01/2020
2.4.2 Connecting the 3-pin voltage terminal with spring
(device variants with the characteristic value HK)
Figure 3: 3-pin voltage terminal with spring, characteristic value HK
Proceed as follows:

Verify the required conditions for connecting the voltage supply.
See “Requirements for connecting electrical wires” on page 7.

Remove the terminal connector from the device.

Open the terminal lock by pressing the corresponding lever with a
screwdriver.
Type of the voltages
that can be
connected Specification of the supply
voltage Pin assignment
DC voltage Rated voltage range
12 V DC ... 24 V DC
Voltage range incl. maximum
tolerances
9.6 V DC ... 32 V DC 24 V DC Plus terminal of the supply
voltage
0 V Minus terminal of the supply
voltage
Functional ground connection
Table 3: Type and specification of the supply voltage and pin assignment on the
device
FR
24V
0V