manualshive.com logo in svg

Belden Hirschmann RS20 U Series, User Manual

Share
Download
Belden Hirschmann RS20 U Series User Manual Download Page 5

Installation RS20/RS30-...U

Release 03 08/2019

5

Safety instructions

General safety instructions

You operate this device with electricity. Improper usage of the device 
entails the risk of physical injury or significant property damage. The 
proper and safe operation of this device depends on proper handling 
during transportation, proper storage and installation, and careful 
operation and maintenance procedures. 

Before connecting any cable, read this document, and the safety 
instructions and warnings.

Operate the device with undamaged components exclusively.

The device is free of any service components. In case of a damaged 
or malfunctioning the device, turn off the supply voltage and return the 
device to Hirschmann for inspection.

Certified usage

Use the device solely for the application cases described in the 
Hirschmann product information, including this manual. 
Operate the device solely according to the technical specifications.

See “Technical data” on page 38.

Supply voltage

The supply voltage is electrically isolated from the housing.

The devices  are designed for operation with safety extra-low voltage. 
Connect only SELV circuits with voltage restrictions in line with IEC/EN 
60950-1 to the supply voltage connections and signal contacts.

Connect only a supply voltage that corresponds to the type plate of 
your device.

 WARNING

UNCONTROLLED MACHINE ACTIONS

 
To avoid uncontrolled machine actions caused by data loss, configure all 
the data transmission devices individually.
Before you start any machine which is controlled via data transmission, be 
sure to complete the configuration of all data transmission devices.

Failure to follow these instructions can result in death, serious injury, 
or equipment damage.

Summary of Contents for Hirschmann RS20 U Series

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands