manualshive.com logo in svg

Belden Hirschmann RPS90/48V HV, User Manual

Share
Download
Belden Hirschmann RPS90/48V HV User Manual Download Page 12

12

Installation RS20/22/30/32/40

Release 03 06/2013

2004/108/EG (EMV)
Directive of the European Parliament and the council for standardizing the 
regulations of member states with regard to electromagnetic 
compatibility.

RPS90/48V HV:
2006/95/EG
Directive of the European Parliament and the council for standardizing the 
regulations of member states with regard to electrical equipment to be 
used within specific voltage ranges.

In accordance with the above-named EU directive(s), the EU conformity 
declaration will be at the disposal of the relevant authorities at the 
following address:

Hirschmann Automation and Control GmbH
Stuttgarter Str. 45-51
72654 Neckartenzlingen
Tel.: +49 1805 141538

The device can be used in the industrial sector.

Interference immunity: EN 61000-6-2

Emitted interference: EN 55022

Warning!

 This is a class A device. This device can cause interference in 

living areas, and in this case the operator may be required to take 
appropriate measures.

Note: 

The assembly guidelines provided in these instructions must be 

strictly adhered to in order to observe the EMC threshold values.

FCC note

This device complies with part 15 of the FCC rules. Operation is subject 
to the following two conditions: (1) this device may not cause harmful 
interference; (2) this device must accept any interference received, 
including interference that may cause undesired operation.
Appropriate testing has established that this device fulfills the 
requirements of a class A digital device in line with part 15 of the FCC 
regulations.
These requirements are designed to provide sufficient protection against 
interference when the device is being used in a business environment. 
The device creates and uses high frequencies and can also radiate high 
frequencies, and if it is not installed and used in accordance with this 
operating manual, it can cause radio transmission interference. The use 
of this device in a living area can also cause interference, and in this case 
the user is obliged to cover the costs of removing the interference.

Summary of Contents for Hirschmann RPS90/48V HV



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands