8
Installation MACH102
Release 07 12/2020
Certified usage
Use the product only for the application cases described in the
Hirschmann product information, including this manual.
Operate the product only according to the technical specifications.
See “General technical data” on page 49.
Connect to the product only components suitable for the requirements
of the specific application case.
Media modules
Only trained service personnel are authorized to plug the
M1-8TP-RJ45 PoE media module into the basic device or remove from
the basic device.
National and international safety regulations
Verify that the electrical installation meets local or nationally applicable
safety regulations.
Requirements for connecting electrical wires
Before connecting the electrical wires,
always
verify that the
requirements listed are complied with.
Requirements for connecting the signal contact
The following requirements apply without restrictions:
The electrical wires are voltage-free.
The cables used are permitted for the temperature range of the application case.
The device is grounded via the voltage supply socket (see
figure 19
und
figure 20
).
Exclusively switch on the device when it is installed.
Relevant for North America:
Exclusively use 60/75 °C (140/167 °F) or 75 °C (167 °F) copper (Cu) wire.
Table 1:
Requirements for connecting electrical wires
The following requirements apply without restrictions:
Limit the connected voltage with a current limitation or in accordance with its application.
Observe the electrical threshold values for the signal contact.
See “General technical data” on page 49.
Table 2:
Requirements for connecting the signal contact
Summary of Contents for Hirschmann MACH102 Series
Page 62: ......
