Installation MACH102
Release 07 12/2020
23
Media module M1-8TP-RJ45
The media module M1-8TP-RJ45 has 8 × 10/100 Mbit ports for
connecting end devices or network segments according to the standards
IEEE 802.3 100BASE-TX / IEEE 802.3 10 BASE-T.
These ports support autonegotiation and autopolarity. The ports are RJ45
sockets. The casings of the RJ45 sockets are electrically connected to the
front panel of the device. The pin assignment is identical to MDI-X. When
the autonegotiation function is enabled, these ports also support
autocrossing.
Figure 6: Media module M1-8TP-RJ45
Media module M1-8TP-RJ45 PoE
The M1-8TP-RJ45 PoE media module supports Power over ETHERNET
(PoE). It has 8 10/100 Mbit/s TP PoE ports.
This port is an RJ45 socket.
The 10/100 Mbit/s PoE port allows you to connect network components
as a PoE voltage sink according to the standard IEEE 802.3 10BASE-T/
100BASE-TX and IEEE 802.3af.
Autonegotiation
Autopolarity
Autocrossing (if autonegotiation is activated)
The devices support the connection and a remote power supply of e.g.,
IP phones (Voice-over-IP), webcams, sensors, print servers, and WLAN
access points via 10BASE-T/100BASE-TX. With PoE, these end devices
are powered by the twisted pair cable.
You can connect PoE terminal devices (PD, Powered Device, type1 or
type2) up to class 0.
The PoE power is supplied via the wire pairs transmitting the signal
(phantom voltage).
The individual ports (joint PoE voltage) are not electrically insulated from
each other.
The following conditions are met in accordance with IEEE 802.3af:
Endpoint PSE
Alternative A
The pin assignment corresponds to MDI-X.
Summary of Contents for Hirschmann MACH102 Series
Page 62: ......
