Belden HIRSCHMANN IT MAMMUTHUS MTM2900-FAN, User Manual

Page: 29 / 52

Installing MAMMUTHUS SWITCH
Published on 01 01/2020
29
2.3 Install equipment and ground
You can install the equipment by the following options:
 Install the equipment in the switch cabinet
 Install the equipment on a vertical flat surface
Warning
Electric shock
Such equipment can only be installed in switch cabinet or restricted operation
place, and the equipment is accessible to maintenance personnel only.
Failure to comply with these guidelines may result in death, serious injury
or equipment damage.
Caution
Overheat
When installing equipment, make sure that the ventilating slots are not covered.
Failure to comply with these guidelines may result in minor injury or
equipment damage.

Install the equipment in the switch cabinet
NOTE: When the equipment is operated in an environment with continuous vibration load
greater than 0.7g, it must be additionally fixed to the switch cabinet with 2 fixed mounting
brackets on the front and back of the equipment.
Additional mounting brackets are provided as accessories. Please refer to “Accessories”
on Page 47.
Preconditions:

Install the equipment in 19" switch cabinet by means of slide or mounting rails.
It can improve the stability of the equipment in an environment affected by vibrations.
For more information about slide/mounting rails and how to install them, please
contact the switch cabinet manufacturer.

The equipment is designed to be installed in a 19" switch cabinet.
At the time of delivery, 2 preinstalled fixed mounting brackets come with the
equipment on the side.

Make sure it's well ventilated. If necessary, install a fan to prevent overheating.

Measure the depth of the 19" cabinet so that all connections can be easily plugged in.