Belden Hirschmann BAT867-F, User Manual, Page: 31 / 54

Installation BAT867-F
Release 01 12/2019
31
4 First login (Password change)
Applies to devices with the following software release and later:
HiLCOS 10.12-RU2
To help prevent undesired access to the device, it is imperative that you
change the default password during initial setup.
Perform the following steps:

Open the Graphical User Interface, the Command Line Interface or
LANconfig the first time you log on to the device.

Log on to the device with the default password “private”.
The device prompts you to type in a new password.
Note: When you log on with LANconfig, the device prompts you to type in
a new password before your first configuration change.

Type in your new password.
Choose a password that contains at least 8 characters which includes
upper-case characters, lower-case characters, numerical digits and
special characters.

Confirm your new password.
For further information see:
https://hirschmann-support.belden.com/en/kb/required-password-change-
new-procedure-for-first-time-login