Belden Hirschman RSPS20, User Manual

Page: 21 / 52

Installation RSPS20/25
Release 09 12/2019
21
1.5.2 100 Mbit/s F/O port (optional)
This port is an SFP slot.
The 100 Mbit/s F/O port allows you to connect network components
according to the IEEE 802.3 100BASE-FX standard.
This port supports:
 100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
Default setting: Full duplex
1.6 Display elements
After the supply voltage is set up, the Software starts and initializes the
device. Afterwards, the device performs a self-test. During this process,
various LEDs light up.
1.6.1 Device state
These LEDs provide information about conditions which affect the operation
of the whole device.
LED Display Color Activity Meaning
Power Supply voltage — none Supply voltage is too low
yellow lights up Device variants with redundant power
supply:
Supply voltage 1
or 2 is on
flashes 4 times
a period Software update is running. Maintain the
power supply.
green lights up Device variants with redundant power
supply:
Supply voltage 1
and 2 is on
Device variants with single power supply:
Supply voltage is on
Status Device Status — none Device is starting and/or is not ready for
operation.
green lights up Device is ready for operation.
Characteristics can be configured
red lights up Device is ready for operation.
Device has detected at least one error in
the monitoring results
flashes 1 time
a period The boot parameters used when the
device has been started differ from the
boot parameters saved.
Start the device again.
flashes 4 times
a period Device has detected a multiple IP address
Status
RM ACA
Power