16
Chapter 1 Product Description
Status indicators
The following sections describe the visual indicators that communicate the current
operating status and system health of the T2.
Power LED
The Power LED indicates status as follows:
WARNING: The power switch does not turn off power to the system. To turn power
off, the system must be disconnected from the power source.
LAN port LED status
The RJ-45 LAN port includes integrated status LEDs. The LEDs oriented as follows:
The meanings of the LED states are described in the following table:
LED behavior
Status Condition
Off
The power is set to Off and the T2 is not operational.
Green steady on
The power is set to On and the T2 is operational.
LED
Color
LED state
Status Condition
Right
Yellow
Off
LAN link is not established.
On
LAN link is established.
Flashing
The computer is communicating with
another computer on the LAN.
Left
Green
Off
10 Mbit/sec data rate is selected / No
connection has been detected.
On
100 Mbit/sec data rate is selected.
Orange
On
1000 Mbit/sec data rate is selected.
!
Green/Orange LED
Yellow LED
