Belden Grass Valley Kayenne K-Frame, Installation & Service Manual

Page: 185 / 288

KAYENNE K-FRAME — Installation & Service Manual 185
Multiple Suite Resource Sharing
Figure 125. Control Surface Menu with Suite 2 PC and Panel
2. Touch
Reset Panel
. This will re-establish system communications.
Note
After reboot,
the Eng Setup, Status menu will display the added control
surface.
Define Default Multi-Suite Engineering Resources
Assign the following items as appropriate to suite 1 or suite 2:
• Outputs (Pgm, Switched Preview, Aux Buses, etc. accessed via
Eng Setup
,
Outputs
). An example showing reassignment of an output for
suite 2 is shown in Figure 126 on page 186 .
Each suite has its own, logical set of outputs that are identically numbered.
Use the
Suite 1 and Suite 2 buttons to assign them to a suite.
• GPI Outputs (
Eng Setup
,
Acquire Resources
,
GPI Outputs
).
• Editor Ports, if used, are permanently assigned for use by each suite
(
Eng Setup
,
Ports & Devices, Editor Ports
).
• Switcher Tally (
Eng Setup
,
Switcher Tally
).
Note Each suite has its own, logical set of outputs that are identically numbered.
Use the
Suite 1 and Suite 2 buttons to assign them to a suite.