Belden Grass Valley IPVU, Installation Manual

Page: 37 / 98

37
IPVU
Installation Guide
The l IPVU-MOUNTING-KIT’s screw hole locations are shown below.
Front View
IPVU-MOUNTING-KIT Bracket Screw Hole Locations

4
Fig. 3-5: Screw hole locations for wall mounting the IPVU-MOUNTING-KIT
To install the IPVU-MOUNTING-KIT on a wall or under a table top
1 Identify the screw hole locations on the IPVU-MOUNTING-KIT bracket. See Figure 3-5.
2 Identify where you want to locate the IPVU and mark the screw hole locations on the
mounting surface. Note that only two of the four screw hole locations need to be used:
choose two screw hole locations that are diagonally opposite to each other.
3 Using a screw fastening system that is adapted to the surface’s material composition
(for example, for a gyprock wall, use plastic anchors and screws), attach the IPVU-
MOUNTING-KIT bracket to the surface.
4 Install the IPVU into the IPVU-MOUNTING-KIT bracket. See Installing the IPVU into the
IPVU-MOUNTING-KIT , on page 38.
5 Connect all cables to the IPVU. See Connecting the IPVU , on page 48.
6 Connect power to the monitor.