Belden Grass Valley IPVU, Installation Manual, Page: 48 / 98

48
Installation
Connecting the IPVU
Connecting the IPVU
Use field-supplied OM4 Multimode Fiber (MMF) single fiber optical cable fitted with SC
connectors with the IPVU. For an installation overview, see
Cabling Diagrams , on page 27.
Proceed as follows:
1 Insert the SFP cartridge(s) into the IPVU: see Installing the SFP Output Module , on
page 95.
2 Connect the optical cable from the switch to the IPVU: first remove the protective caps
from the receiver’s optical input port and from the optical cable, then insert the optical
cable connector into the IPVU’s optical port
MEDIA 1 . If SMPTE 2022-7 is being used,
repeat for the IPVU’s optical port MEDIA 2 .
Protective Caps
Optical Cable
Protective Cap



3 Connect the management network to the IPVU: connect the Cat5 cable from the
management switch to the IPVU’s MANAGEMENT port.
Cat5 Cable with
RJ-45 Connector