GUIDE TO INSTALLATION AND OPERATION
HDA-3911/31 |
17
•
Remote System Administration:
opens the Joining Locators data
box, which lists remote lookup services to which this HDA-39x1 is
registered.
Add:
Force the iControl service for this HDA-39x1 to register itself
on a user-specified Jini lookup service, using the following syntax in
the Input data box:
jini://<ip_address>
where <ip_address> is the ip address of the server running the
lookup service
Remove:
select one of the services listed in the Joining Locators window by clicking on it, and click
Remove
to
delete it from the window. You will be asked to confirm the removal in a Query box.
3.4.8 The Presets panel
User Presets
The HDA-39x1 has memory registers which can hold up to 5 user-defined
parameter settings.
Select
any one of the five presets using the pull-down list. The name of
the currently-selected User Preset is shown on the name bar.
Click
Load
to load the contents of the selected User Preset into the HDA-
39x1. All parameter settings and values will be replaced by the contents of
the selected User Preset.
Click
Save
to store the current parameter settings and values from the
HDA-39x1 into the selected User Preset. The existing contents of the
preset will be overwritten without asking for confirmation.
Figure 3.14 Joining Locators window
Figure 3.15 Presets panel
