Note:
Ethernet settings are not included in the Factory data set, and are not
changed when the Factory Default alignment is installed.
26
Configuration
alignment in its memory, to which it can be restored at any time.
iControl - click the
Factory Control
button
Click the
Load Factory
button to restore the
card to the Factory default alignment.
Click the
Load Factory
button to restore the
card to the Factory default alignment.
Using the menu
The factory default values can be loaded from the FACTORY DEFAULT menu item.
The default values are shown underlined in the menu listing beginning on
.
Time Management.
The CPU-ETH3 controller is time-aware, and its internal clock can be updated manually or via
NTP.
