Belden Grass Valley CopperHead 3404, User Manual

Page: 34 / 113

28
Feature Detailed Description
CopperHead 3404 Base Station
CopperHead 3404 Base Station
The CopperHead 3404 Base Station is available with a number of options. The unit is
ordered with a specified Power Module, Audio/Intercom Module and Fiber Connector. For
an overall view of component location, see the overall diagrams in
System Overview
Diagrams on page 104.
CopperHead 3404 Base Station Front Panel
Fig. 4-14: CopperHead 3404 Base Station Front Panel
• A : Optical Connector (see Area A - Front Panel Optical Connector (Optional) on
page 28)
• B : Audio/Data Indicators (see Area B - Audio Indicators on page 29)
• C : Video/Data Indicators (see Area C - Video/Data Indicators on page 29)
• D : Signal Strength Indicators/Setup (see Area D - Signal Strength Indicators/Setup on
page 30)
• E : Status/Power Indicators (see Area E - Status/Power Indicators on page 30)
Area A - Front Panel Optical Connector (Optional)
Area A of the CopperHead 3404 Base Station provides for the optional mounting of the
Fiber Optical Connector on the front of the Base Station instead of the rear of the Base
Station. Please consult with Grass Valley support if you are interested in moving the Fiber
Optical Connector.
Three types of Fiber Connectors are available for use with the CopperHead 3404 Base
Station. Typically one of these Fiber Connectors is pre-configured at the time of delivery.
Fig. 4-15: Fiber Connector Types
OpticalCON SMPTE 304M ST and Molex
Connectors
ST Connectors