Starting operation
Technical manual LioN-P PROFINET IO-Link Master
Release 2.0 04/2017
6.4 Configuration of the LioN-P PRO-
FINET I/O modules in STEP 7
37
Check whether the IP address displayed is correct, and the control unit and
module are on the same Ethernet subsystem.
Confirm the entries by pressing "OK".
6.4.2
Assigning a device name to a LioN-P module
An online PROFINET connection between the programming device and the
module is required to assign the device name to a module.
Select the LioN-P module and open the
Target device > Ethernet >
assign name
dialog.