Belden 1RU32LCD-BK-K, User Manual, Page: 89 / 269

67
G2 Series 1U Router Control Panel
User Manual
Fixed Button Text Pane
This template section appears for LCD panels only. It is used to define the button-face text
that appears on
fixed buttons on the panel ( i.e. not the source and destinations buttons).
Fig. 5-17: Fixed Button Text Pane
To edit a text field:
1 Click in a text field.
2 Delete existing text and retype as required.
3 Press the Enter key, (or click on the button for that particular field).
Repeat for each of the text fields as necessary.
To set a name back to the factory default, click on the button for that component.
Take, Undo, Protect, Locked State and Unlocked State
These buttons may each contain up to three lines of text; each line contains up to six
characters; each line must be delimited by a space character, ” “. For example,
Source and Destination Page-up and Page-down
These buttons each have three lines of text: The top line is non-editable and indicates the
current page number, [X]. The next two lines of text are editable by default. For example,
If required, the top line of text may be used to name a specific page. (See BPX Mapping
Template on page 100.)
See Take, Undo,
Protect, Locked State
and Unlocked State
on page 67.
See Source and
Destination Page-up
and Page-down
on
page 67.
TAKE 
the
Route
Take text “TAKE the Route” results in
:
[2]

My
Dest
Indicates that page 2 of the destinations is
currently displayed