1523.6-0000010 OM
63
2.20.3 Fuses for electronic systems of rear axle DL, FDA, GB reduction unit, FPTO
and RLL control
To access the cutout fuses of electronic control systems (ECS), turn off screw 3
(figure 2.20.12) on cap 2 of side console 1 and open the cap.
1 – side console; 2 – cap; 3 – screw.
Figure 2.20.12
– The location of fuses for ECS of rear axle DL, FDA, GB reduction unit,
FPTO and RLL.
The fuses for ECS of rear axle DL, FDA, GB reduction unit, FPTO (if mounted) and
RLL are shown in figure 2.20.13.
Figure 2.20.13
– Fuses for ECS of rear axle DL, FDA, GB reduction unit, FPTO and RLL
Five cutout fuses (figure 2.20.13) protect the following electric circuits from overcharge:
1 – FDA drive control (7,5
А
);
2 – rear axle DL control (7,5
А
);
3 – FPTO control, if mounted (7,5
А
);
4 – RLL control (7,5
А
);
5 – GB reduction unit control, if mounted (15
А
);
6 – duplicate (7,5
А
).
GB reduction unit
FPTO
FDA
DL
Cable colors: K – red, O – orange, P – pink,
Ч
– black,
Ж
– yellow,
С
- grey
Connector between fuses
Power supply “+12V”
after engine start
Cable of RLL control
system
Cable of control systems, DL,
FDA and GB reduction unit
Power supply “+12V” after turning
the starter and instruments switch
key to the position “Instruments
power supply”