June 30, 2006
Confidential
Document Number BDTM10001-A05 Standard
BelAir100 User Guide
Access Radio Configuration
Access Radio Configuration
This chapter describes how to display and configure radio parameters that are
specific to access radios, including:
• “Client Information” on page 40
• “Access Radio Transmission Rates” on page 43
Other aspects of radio configuration and operation are described in:
• “Wireless Security” on page 59
• “Managing Access Radio SSIDs” on page 76
All CLI commands described in this chapter are available in
radio
mode.
To configure parameters that are specific to backhaul radios, including the
different types of backhaul links, see “Backhaul Link Configuration” on page 46.
To configure parameters that are common to both access radios and backhaul
radios, see “Common Radio Module Configuration Commands” on page 32.
For full details on radio module configuration, see the
BelAir100 Radio
Command Line Interface Guide.
Client
Information
You can display information about the clients that are associated, or that were
recently associated to the AP.
Displaying the Number
of Associated Clients
show
arm<n>
client associated [
ssidx
<ssid_index>]
This command displays the list of associated wireless clients for a given SSID. If
no SSID is specified, the displayed list shows all associated clients and their
SSID.
The
ssid_index
parameter must be a valid SSID index. The default value is 1.
Table 5 explains the various fields in the resultant output.
Table 5: Output Field Descriptions
Field
Description
IP
Client's IP address. (s) indicates static IP addressing
identity 802.1X client identity. Present for dot1x or WPA SSIDs
