MADI-SWITCH User Manual v1.1
7
Bel Digital Audio Limited
Front Panel Description
PSU
status
–
two bi-colour LEDs confirming
the current status of each PSU. The LEDs are green
in normal operation and red if a PSU fault condition
is detected.
SEL –
a momentary toggle switch with lock
position. Used to select the MADI source to route to
the MADI outputs on the rear panel.
IN –
MADI input connector. Conector
type depends on model: BNC (75 ohm) or Fibre
(multimode as standard)
OUT –
Active MADI loop-through connector.
Connector type depends on model: BNC (75 ohm) or
Fibre (multimode as standard)
SIG –
LED indication of active source being
connected to the MADI input connector.
SEL –
LED used to indicate which MADI
source is routed to the rear panel fibre and coaxial
MADI outputs.
Scribble Strip –
traditional scribble strip to
label the incoming MADI streams.
SEL
PSU
MADI-SWITCH
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
SIG SEL
SIG SEL
SIG SEL
SIG SEL
SIG SEL
SIG SEL
SIG SEL
SIG SEL
MS64-C
SWITCH
MADI
DIGITAL GROUP