4
cinch.com
Heat Sink Option
Mosfet
Press fit spring plates into board
Slots (2) for Spring Plate press fit
R
L
•
Refer to Cinch header prints for specific
board layout and spring plate selection.
Install heat sink spring plates
• Install the spring plates after the printed
circuit board has been processed.
• Spring plates are marked “R” and “L” and
must be installed as indicated.
• When using a one (1) heat sink, use
spring plate “R” only.
• Spring plates and thermally conductive
adhesive paste are necessary to
guarantee proper heat conduction
through the heat sinks;
Cinch recommends Loctite 383.