BM-‐AV2-‐E16SHD
2012
Version 1.0
Page 9
Rear panel inputs
The BM-AV2-E16SHD accepts SDI video, AES and analogue audio inputs. Eight
differential analogue inputs are provided on a 25 way ‘D’ type connector. Inputs 1 and 2 are
duplicated on XLR connectors and sum with the corresponding inputs from the ‘D’ type
connector. Eight pairs of AES unbalanced inputs are available on BNC connectors. Two
SD, HD, 3G auto select SDI inputs are provided.
Rear panel outputs
The BM-AV2-E16SHD provides both digital and analogue audio outputs on the rear panel.
Eight differential analogue outputs on a 25 way ‘D’ type connector and eight pairs of AES3
on BNC connectors are available. The audio carried on the AES outputs are derived from
the currently selected input source (analogue, AES or SDI). In effect, these audio outputs
are a copy of the signals shown on the unit’s bargraphs. The analogue outputs are derived
from the lower 8 inputs (Ch1-8). They can thus be a copy of the AES inputs, two of the
currently demuxed SDI groups or the eight decoded Dolby signals. Two line outputs are
provided which carry the same audio as the speakers. The levels of the analogue and line
outputs are adjustable in the menu. It is possible to mute the output from the unit’s speakers
by pressing the end of the
VOLUME
control. It is also possible to independently mute the
analogue outputs and the line outputs using the volume control.
An SDI loop through is available which carries a reconstituted SDI signal from the currently
selected SDI input.
