BM-‐AV2-‐E16SHD
2012
Version 1.0
Page 6
Front panel controls
Volume
The volume of the speaker and headphone output can be adjusted using this control. It
can also be set to adjust analogue and line output level from the menu. Pressing the end
of the control will mute the speaker audio. This can also mute the line and analogue
outputs as selected in the menu.
Balance
This control will differentially adjust the level of the speaker and headphone output.
Pressing the end of this control will centre the audio output.
Dolby pair select
This control will select which pair of audio inputs is applied to the Dolby decoder.
Mode select
This control will set the way in which the monitor will treat the incoming audio. The
PCM
position will treat the current audio input as straight PCM encoding and reproduce it
unprocessed on the 16 available channels.
The
IND
position will decode Dolby encoded information from the selected Dolby pair and
produce 8 audio outputs. These can then be mixed as required.
The positions
1
to
8
will provide a stereo mixdown of the programmes encoded in the
Dolby input.
Menu
Pressing the end of this control will enter the menu mode described in the
Menu
section.
Input select
Rotating this control will select one of the four audio input sources; Analogue, AES, SDI1
or SDI2.
