12 / EN
Washing Machine / User’s Manual
Installation
3.6 Adjusting the feet
A
CAUTION:
In order to ensure that the
product operates more silently and
vibration-free, it must stand level and
balanced on its feet. Balance the machine
by adjusting the feet. Otherwise, the
product may move from its place and
cause crushing and vibration problems.
1 Loosen the lock nuts on the feet by hand.
2 Adjust the feet until the product stands in a
stable and balanced way.
3. Tighten all lock nuts by hand again.
A
CAUTION:
Do not use any tools to loosen
the lock nuts. Otherwise, they will get
damaged.
3.7 Electrical connection
Connect the product to a grounded outlet
protected by a 16 A fuse. Our company shall not
be liable for any damages that will arise when the
product is used without grounding in accordance
with the local regulations.
• Connection must comply with national
regulations.
• Power cable plug must be within easy reach
after installation.
• If the current value of the fuse or breaker in the
house is less than 16 Amps, have a qualified
electrician install a 16 Amp fuse.
• The voltage specified in the "Technical
specifications" section must be equal to your
mains voltage.
• Do not make connections via extension cables
or multi-plugs.
B
CAUTION:
Damaged power cables must
be replaced by the Authorized Service
Agents.
3.8 Initial use
Before starting to use the product make sure
that the preparations are made which are in
line with the “Important Safety and Environment
Instructions” and the instructions in the
“Installation” section.
To prepare the product for washing laundry,
perform first operation in Drum Cleaning
programme. If this program is not available in your
machine, apply the method which is described in
the section 6.2.
C
Use an anti-limescale suitable for the
washing machines.
Some water might have remained in the
product due to the quality control processes
in the production. It is not harmful for the
product.