16 / EN
Washing Machine / User’s Manual
Just press Start / Pause / Cancel button. Pause symbol
disappears. Start symbol appears. Programme resumes and
discharges the water only.
4.20 End of programme
“End” appears on the display at the end of the programme.
Symbols of the programme steps remain lit. Auxiliary
function, spin speed and temperature that were selected at
the beginning of the programme remain selected.
4.21 Your machine is equipped
with a “Standby Mode”
In case of not starting any programme or waiting without
making any other operation when the machine is turned
on by On/Off button and while it is in selection step or if
no other operation is performed approximately 2 minutes
after the programme you selected has come to an end,
your machine will automatically switch to energy saving
mode. Brightness of indicator lights will decrease. Also,
if your product is equipped with a display showing the
programme duration, this display will completely turn off. In
case of rotating the Programme Selection knob or pressing
any button, lights and display will restore to their previous
condition. Your selections made while exiting the energy
saving mode may change. Check the appropriateness of
your selections before starting the programme. Readjust if
necessary. This is not a fault.
5 Maintenance and cleaning
Service life of the product extends and frequently faced
problems decrease if cleaned at regular intervals.
5.1 Cleaning the detergent drawer
Remove any powder residue buildup in the drawer. To do
this;
1
2
3
4
You can remove the detergent drawer by pulling it towards
yourself strongly.
C
If more than a normal amount of softener and liquid
detergent mixture starts to remain in the softener
compartment, the siphon must be cleaned.
Wash the drawer and the siphon with plenty of lukewarm
water in a washbasin. Wear protective gloves or use an
appropriate brush to avoid touching the residues in the
drawer when cleaning. Replace the drawer into its housing
after cleaning. Check if the siphon is in its original location.
5.2 Cleaning the loading door and the drum
For products with drum cleaning programme, please see
Operating the product - Programmes.
For products without drum cleaning, follow the below steps
to clean the drum:
Select
Additional Water
or
Extra Rinse
auxiliary functions.
Use a Cottons
programme
without pre-wash. Set
the
temperature to the level recommended on the drum
cleaning agent which can be provided from authorized
services.
Apply this procedure
without any laundry in
the product.
Before starting the programme, put 1 pouch
of special drum cleaning agent (if the special agent could
not be supplied, put max. 100 g of powder detergent /
anti-limescale) into the main wash detergent compartment
(compartment no. “2”). If the detergent / anti-limescale
is in tablet form, put only one tablet into the main wash
compartment no. “2”. Dry the inside of the bellow with a
clean piece of cloth after the programme has come to an
end.
C
Repeat Drum Cleaning process in every 2 months.
C
Use an detergent / anti-limescale suitable for the washing
machines.
