26
EN
Main Wash
Main Wash symbol indicating that the main
wash step has started appears on the
display.
Rinse
Rinse symbol indicating that the rinsing
step has started appears on the display.
Softener
Softener symbol indicating that the softener
step has started appears on the display.
Spin
Appears at the beginning of the final spin
step and remains lit during Spin and Pump
special programmes.
C
If the machine does not pass to the
spinning step, Rinse Hold function
might be active or the automatic
unbalanced load detection system
might be activated due to the
unbalanced distribution of the laundry
in the machine.
Loading door lock
There is a locking system on the loading
door of the machine that prevents opening
of the door in cases when the water level is
unsuitable.
Door Locked symbol appears when the
loading door is locked. This symbol will
flash until the loading door becomes ready
to open when programme completes or
the machine is paused. Do not force to
open the loading door in this step. Symbol
disappears when the door is ready to open.
You can open the door when the symbol
disappears.
Changing the selections after
programme has started
Switching the machine to pause mode
Press the Start / Pause / Cancel button to
switch the machine to pause mode. Pause
symbol appears on the display indicating
that the machine is paused. Start symbol
disappears.
F2
F4
F1
F3
Changing the speed and temperature
settings for auxiliary functions
Depending on the step the programme has
reached, you may cancel or activate the
auxiliary functions; see, "Auxiliary function
selection".
You may also change the speed and
temperature settings; see, "Spin speed
selection" and "Temperature selection".
Adding or taking out laundry
1. Press the Start / Pause / Cancel button
to switch the machine to pause mode.
The programme follow-up light of the
relevant step during which the machine
was switched into the pause mode will
flash.
2. Wait until the Loading Door can be
opened.
3. Open the Loading Door and add or
take out the laundry.
4. Close the Loading Door.
5. Make changes in auxiliary functions,
temperature and speed settings if
necessary.
6. Press Start / Pause / Cancel button to
start the machine.
C
The loading door will not open if the
water temperature in the machine is
high or the water level is above the
door opening.
Child Lock
Use Child Lock function to prevent children
from tampering with the machine. Thus
you can avoid any changes in a running
programme.
C
You can switch on and off the machine
with On / Off button when the Child
Lock is active. When you switch on the
machine again, programme will resume
from where it has stopped.
To activate the Child Lock:
Press and hold 2
nd
and 4
th
Auxiliary
Function buttons for 3 seconds. “Con”
appears on the display.
C
Same phrase will appear on the display
if you press any button when Child
Summary of Contents for WMB 71442 S
Page 1: ...WMB 71442 S WMB 71442 W Automatic washing machine ...
Page 39: ...39 EN ...
Page 40: ......