background image

EN

32

Washing 

performance is 

poor:

Laundry turns 

gray

 - Using insufficient 

amount of detergent for a 

long time,

 - Washing at low 

temperatures for a long 

time,

 - Using insufficient 

amount of detergent for 

hard waters (soil can stick 

to the laundry),

 - Using excessive amount 

of detergent (detergent 

can stick to the laundry).

 - Use the recommended amount of detergent 

appropriate for water hardness and the laundry.

 - Select the proper temperature for the laundry 

to be washed.

 - If the water hardness is high, using an 

insufficient amount of detergent can cause 

laundry to turn gray over time.

 - It is difficult to eliminate such grayness once 

it occurs.

Washing 

performance is 

poor:

Stain could not 

be removed, 

not cleaned.

Laundry 

could not be 

whitened.

Insufficient amount of 

detergent used.

Use recommended amount of detergent 

appropriate for the laundry.

Excessive laundry loaded 

into machine

Do not load the machine in excess.

Wrong program and 

temperature might have 

been selected.

Select the proper program and temperature for 

the laundry to be washed.

Improper detergent may 

have been used.
Wrong type of detergent 

used.

Put the detergent in the correct compartment.

Do not mix detergent with bleaching agents.

Washing 

performance is 

poor:

Oily stains 

appear on 

laundry.

Oily accumulations on the 

drum may have stuck to 

the laundry.

Such odors and bacteria layers may be formed 

on the drum as a result of continuous washing 

at lower temperatures and/or in short programs. 

Leave the detergent dispenser drawer as well 

as the loading door of the machine ajar after 

each washing. Thus, a humid environment 

favorable for bacteria cannot be created inside 

the machine.

Machine must be operated empty either at 

60°C or 90°C program with detergent every 6 

months.

Washing 

performance is 

poor:

Bad odor

Oily accumulations on the 

drum may have stuck to 

the laundry.

Machine must be operated empty either at 

60°C or 90°C program with detergent every 6 

months.

Color of the 

clothes faded.

Excessive laundry might 

have been loaded in.

Do not overload the machine.

Detergent may have 

gotten damp.

Store detergent in a closed and dry place. Do 

not keep them under high temperatures.

A higher temperature 

might have been selected.

Select the proper program and temperature 

according to the type and soiling degree of the 

laundry.

Summary of Contents for WMA 747 S





































Reviews: