Beko WIC74545F2, User Manual

Page: 31 / 56

31 / EN
Washing Machine / User’s Manual
4.6.10.2 Functions/Programmes Selected by Pressing the Function Buttons for 3 Seconds
• Drum Clean 3’’
Press and hold the auxiliary function button 1 for 3 seconds to select the programme.
Use regularly (once in every 1-2 months) to clean the drum and provide the required
hygiene. Operate the programme while the machine is completely empty. To obtain
better results, put powder lime-scale remover for washing machines into the detergent
compartment no. “2”. When the programme is over, leave the loading door ajar so that the
inside of the machine gets dry.
C
This is not a washing programme. It is a maintenance programme.
Do not run the programme when there is something in the machine. If you try to do so, the
machine detects that there is load inside and aborts the programme.
• Child lock 3
II
Use Child Lock function to prevent children from tampering with the machine. Thus you
can avoid any changes in a running programme.
C
If the Programme Selection knob is turned when the Child Lock is active, "Con" appears on
the display. The Child Lock does not allow any change in the programmes and the selected
temperature, speed and auxiliary functions.
Even if another programme is selected with the Programme Selection knob while the Child
Lock is active, previously selected programme will continue running.
To activate the Child Lock:
2. Pres and hold the Auxiliary Function button for 3 seconds. C03, C02, C01 will appear
on the display respectively while you keep the button pressed for 3 seconds. Then, while
the light of the Auxiliary Function button 2 is flashing, "Con" will appear on the display
indicating that the child lock has been activated. If you press any button or turn the
Programme Selection knob when the Child Lock is active, same phrase will appear on the
display.
To deactivate the Child Lock:
Press and hold the Auxiliary Function button 2 for 3 seconds while a programme is
running. C03, C02, C01 will appear on the display respectively while you keep the button
pressed for 3 seconds. Then, while the light of the auxiliary function button 2 is flashing,
"COF" will appear on the display indicating that the child lock has been deactivated.
C
In addition to the method above, to deactivate the Child Lock, switch the Programme
Selection knob to On / Off position when no programme is running, and select another
programme.
Child Lock is not deactivated after power failures or when the machine is unplugged.