11
EN
• Spin + Drain
Use this programme to apply an additional spin
cycle for your laundry or to drain the water in
the machine.
Before selecting this programme, select the
desired spin speed and press Start / Pause
/ Cancel button. The machine will spin the
laundry with the set spin speed and drain the
water coming out of them.
If you wish to drain only the water without
spinning your laundry, select the Pump+Spin
programme and then select the No Spin
function with the help of Spin Speed
Adjustment button. Press Start / Pause /
Cancel button.
C
Use a lower spin speed for delicate
laundries.
Temperature selection
Whenever a new programme is selected,
the maximum temperature for the selected
programme appears on the temperature
indicator.
To decrease the temperature, press the
Temperature Adjustment button. Temperature
decreases with increments of 10° and finally,
“-” symbol indicating the cold wash option
appears on the display.
C
If you scroll to cold wash option and press
Temperature Adjustment button again,
the recommended temperature for the
selected programme appears on the
display. Press the Temperature Adjustment
button again to decrease the temperature.
Economy symbol
Indicates the programmes and temperatures
that provide energy savings.
C
Economy symbol can not be selected in
Intensive and Hygiene programmes since
washing is performed in long times and
at high temperatures in order to provide
hygiene. Similarly, Economy symbol can
not be selected in Baby, Refresh, Drum
Cleaning, Spin and Rinse programmes as
well.
Spin speed selection
Whenever a new programme is selected, the
recommended spin speed of the selected
programme is displayed on the spin speed
indicator.
To decrease the spin speed, press the Spin
Speed Adjustment button. Spin speed
decreases gradually. Then, depending on
the model of the product, “Rinse Hold” and
“No Spin” options appear on the display.
See “Auxiliary function selection” section for
explanations of these options.
C
Rinse Hold option is indicated with “
” symbol and No Spin option is indicated
with “
” symbol.
