background image

4 / EN

Washing Machine / User Manual

u

 Packaging materials may be dangerous for the children. Keep 

packaging materials in a safe place away from reach of the children.

u

  Electrical products are dangerous for the children. Keep the children 

away from the product when it is in use. Do not allow them to play 

with the product. Use child lock to prevent children from intervening 

with the product.

u

  Do not forget to close the loading door when leaving the room where 

the product is located.

u

 Store all detergents and additives in a safe place away from the 

reach of the children by closing the cover of the detergent container 

or sealing the detergent package.

1.3 Electrical safety

u

 If the product has a failure, it should not be operated unless it is 

repaired by the Authorised Service Agent. Risk of electric shock!

u

 This product is designed to resume operating in the event of 

powering on after a power interruption. If you wish to cancel the 

programme, see "Cancelling the programme" section.

u

  Plug the product into a grounded outlet protected by a 16 A fuse. Do 

not neglect to have the grounding installation made by a qualified 

electrician. Our company shall not be liable for any damages that 

will arise when the product is used without grounding in accordance 

with the local regulations.

u

  Do not wash the product by spraying or pouring water onto it! Risk of 

electric shock!

u

  Never touch the power cable plug with wet hands! Do not grab the 

power cord to unplug the machine, always unplug it by holding the 

socket with one hand, and pulling the plug with the other hand.

u

 Product should be unplugged during installation, maintenance, 

cleaning and repair procedures.

u

  If the power cable is damaged, it must be replaced by the manufacturer, 

after sales service or a similarly qualified person (preferably an electrician) 

or someone designated by the importer in order to avoid possible risks.

1.4 Hot surface safety

While washing the laundry at high temperatures, 

the loading door glass will get hot. Considering 

this fact, during washing operation keep the 

children away from the loading door of the 

product to prevent them touching it.

Summary of Contents for VOLTAS WFL6010VPWW

































Reviews: