Beko TBN5400, User Manual

Page: 13 / 56

13 / EN
Table Blender / User Manual
3
Operation
12. Close the lid by turning clock-
wise. Make sure that the cap/
measuring cup is inside the lid
opening and is secured.
3.3 Grinder
1. Place your appliance on a solid
and flat surface.
2. Put the coffee beans (max. 50 g.
to be in the grinder jug.
3. Assemble the blade unit care-
fully on the grinder jug by tur-
ning it counterclockwise.
4. Place the grinder jug onto the
motor housing.
5. Connect the power plug to a sui-
table power outlet.
6. The cutting speed can be vari-
ably adjusted with the control
dial.
C
To operate the blend-
er at the low speed,
turn the control dial
to “1”. If you want to
blend with a higher
speed, turn the con-
trol dial to the speed
level “2”.
7. After grinding, turn the control
dial to 0 to switch off the blen-
der.
8. Set the grinder with the opening
facing down on a level surface
and remove the blade unit by
turning it counterclockwise.
A
WARNING: Never
run the blender for
longer than 30 sec-
onds, otherwise it
would overheat.
After running the ap-
pliance for 1 minute,
let it cool down be-
fore using it again.
3.4 Fruit Filter
(TBN5400/
TBN5500)
The fruit filter is for fresh fruit
juices and cocktails. It prevents pips
and skins from your drink.
1. Fit the filter into the middle of
the jug.
2. Cut the fruit into small pieces
and put it in the fruit filter.