Beko SPA9130B, User Manual

Page: 17 / 125

Steam Generator / User Manual
17 / EN
4 Troubleshooting
Problem Possible reason Solution
Although the appliance is plugged
in, soleplate (9) does not heat up.
The plug or power cord of the
appliance may be faulty.
Contact the authorized service if
the appliance does not operate
although the appliance is plugged
in.
The appliance does not generate
steam.
Amount of the water in the
water reservoir (8) might be
insufficient.
Fill the water reservoir (8) with wa-
ter up to MAX level.
Operate the appliance in steam
mode.
Sediments and residues fall of
from the base (9) while ironing.
If the water you use for your
appliance is too limy, such
sediments may form.
Fill the water reservoir of the appli-
ance by mixing the tap water and
drinking water for your next ironing
operations.
Use the auto descaling feature
more frequently if the water in your
area is hard.
There are stains at the soleplate
(9).
Wet clothes are ironed / scale
stains have occurred on the
base (9).
Wipe the sediments and residues
with a lightly dampened cloth after
the appliance is cooled down ad-
equately.
The “CALC CLEAN” symbol flash-
es on the LED display (3).
The time for descaling has
been reached.
Perform the descaling procedure.
Icons on the led screen (3) are not
clear.
Protective film on the led
screen may be still on.
Remove the protective film on the
led screen (3).
Noise from the appliance. Water level in the water tank
(8) may be reduced. Noise
occurrence due to decrease
in the water tank is normal.
Fill the water up to MAX line in the
water tank (8).