
Safety and environmental instructions
4 /22 EN
Refrigerator / User Manual
t
If there is a lock on the door of the product,
the key should be kept out of the reach of
children.
A
1.3 - Electrical safety
t
The product must be unplugged during ins-
tallation, maintenance, cleaning, repairing
and moving procedures.
t
If the power cable is damaged, it must be
replaced by a qualified person specified
by the manufacturer, authorised service
agent or importer in order to avoid potential
dangers.
t
Do not squeeze the power cable under or
behind the product. Do not place heavy ob-
jects on the power cable. Power cable must
not be bent excessively, pinched or get in
contact with any heat source.
t
Do not use extension cords, multi-sockets
or adapters to operate the product.
t
Portable multi-sockets or portable power
sources can overheat and cause fire.
Therefore, do not keep any multi-sockets
behind or near the product.
t
Plug must be easily accessible. If this is not
possible, the electrical installation to which
the product is connected must contain a
device (such as a fuse, switch, circuit bre-
aker, etc.) which conforms to the electrical
regulations and disconnects all poles from
the grid.
t
Do not touch the power plug with wet
hands.
t
Remove the plug from the socket by grip-
ping the plug and not the cable.
A
1.4 - Transportation safety
t
Product is heavy; do not move it alone.
t
Do not hold its door when moving the pro-
duct.
t
Pay attention not to damage the cooling
system or the piping during transportation.
If the piping is damaged, do not operate
the product and call the authorised service
agent.
A
1.5 - Installation safety
t
Call the authorised service agent for instal-
lation of the product. To make the product
ready for use, check the information in the
user manual to make sure that the elect-
ricity and water installations are suitable.
If they are not, call a qualified electrician
and plumber to have the necessary arran-
gements made. Otherwise, there is the risk
of electric shock, fire, problems with the
product, or injury!
t
Prior to installation, check if the product has
any defects on it. If the product is damaged,
do not have it installed.
t
Place the product on a clean, flat and solid
surface and balance it with adjustable feet.
Otherwise, the product may tip over and
cause injuries.
t
The installation location must be dry and
well ventilated. Do not place carpets,
rugs or similar covers under the product.
Insufficient ventilation causes the risk of
fire!
t
Do not cover or block the ventilation ope-
nings. Otherwise, power consumption incre-
ases and your product may get damaged.
t
Product must not be connected to supply
systems such as solar power supplies.
Otherwise, your product may get damaged
due to sudden voltage changes!
t
The more refrigerant a refrigerator contains,
the larger the installation location must
be. If the installation location is too small,