Beko RCNK296K00W, User Manual

Page: 33 / 44

33 / EN
Refrigerator / User manual
4.1. What to do for energy saving
A
Connecting the product to electronic
energy-saving systems is harmful, as it
may damage the product.
• Do not keep the refrigerator doors open for
long periods.
• Do not place hot food or beverages into
the refrigerator.
• Do not overfill the refrigerator; blocking
the internal air flow will reduce cooling
capacity.
• In order to store the maximum amount of
food into the cooler compartment of your
refrigerator, you should take out the upper
drawers and place it onto the glass rack.
The declared energy consumption of your
refrigerator was determined by taking out
the cooler, ice tray and upper drawers in
a way that will enable maximum storage.
Using the below drawer when storing is
strongly recommended. Energy saving
function should be activated for best
energy consumption.
• You should not block the airflow by putting
food in front of the cooler fan. A space of
minimum 3cm must be left in front of the
protective fan wire when placing food.
• Depending on the product’s features;
defrosting frozen foods in the cooler
compartment will ensure energy saving
and preserve food quality.
• Food should be stored using the drawers in
the cooler compartment in order to ensure
energy saving and protect food in better
conditions.
• Food packages should not be in direct
contact with the heat sensor located in the
cooler compartment. If they are in contact
with the sensor, energy consumption of the
appliance might increase.
• Make sure the foods are not in contact
with the cooler compartment temperature
sensor described below.
4.2. First Use
Before using your refrigerator, make sure
the necessary preparations are made in
line with the instructions in “Safety and
environment instructions” and “Installation”
sections.
• Keep the product running with no food
inside for 6 hours and do not open the
door, unless absolutely necessary.
C
A sound will be heard when the
compressor is engaged. It is normal
to hear sound even when the
compressor is inactive, due to the
compressed liquids and gasses in the
cooling system.
C
Front edges of the product might
heat up. This is normal. These areas
are designed to warm up in order to
prevent condensation.
C
In some models indicator panel turns
off automatically 5 minutes after the
door closes. It will be reactivated
when the door is open or any button
is pressed.
4 Preparation