Beko QZ32, Installation & Operating Instructions Manual, Page: 10 / 28

EN
9
Important
Installation Instructions
1. To avoid a hazard due to instability
of the appliance, it must be fixed in
accordance with the instructions.
2. Do not operate this appliance unless
installed to furniture.
3. The appliance should be located
on a smooth surface. The four front
and back feet can be adjusted
as required. To ensure that, your
appliance is standing upright adjust
the four front and back feet by turning
clockwise or anti-clockwise, until
the product is in firm contact with
the floor. Correct adjustment of feet
avoids excessive vibration and noise.
4. Refer to «Cleaning and Care» section
to prepare your appliance for use.
To avoid any loss in performance, air
channels should not be obstructed.
Minimum distance between the wall
and the appliance must be at least 10
mm.
5. The appliance must be protected
against rain, moisture and other
atmospheric influences.
Important: Care must be taken
while cleaning / carrying the appliance
to avoid touching the bottom of the
condenser metal wires at the back of
theappliance as you might injure your
fingers and hands
Important: This appliance is not
designed for stacking with any other
appliance.When
positioning your
appliance, take care not to damage
your flooring, pipes,wall coverings etc.