80 / EN
Washer-Dryer / User Manual
5.18 Cancelling the programme
The programme will be cancelled if the
programme selection knob is switched to
another programme or if the machine is
switched off and on with this button.
C
INFORMATION
• The programme will not be cancelled if you
turn the programme selection knob while
child lock is enabled. You should cancel the
Child Lock first.
• If you want to open the loading door after
you have cancelled the programme but
you cannot do it since the water level in the
machine is above the loading door baseline,
turn the Programme Selection knob to
Pump+Spin programme and discharge the
water in the machine.
5.19 End of programme
Once the programme is completed, the End
symbol will be displayed.
If you do not press any button for 10 minutes,
the machine will switch to OFF mode. Display
and all indicators are turned off.
If you press any button, the completed
programme steps will be displayed.
5.20 Your machine has the
"Pause Mode" function.
After using the On/Off button to switch on the
machine, if you do not start any programme in
the selection step or do not perform anything
else, or if you do not do anything in 2 minutes
after the selected programme has ended, the
programme will automatically switch to energy
saving mode. Also, if your product has a display
that shows programme time, this display will be
completely turned off. If you turn the programme
knob or touch any button, the lights will switch
back to previous position. The selections you
make when exiting the energy efficiency mode
may change. Check if your selections are correct
before starting the programme. If necessary,
make adjustments again. This is not an error.
5.21 HomeWhiz and the
Remote Control Function
HomeWhiz allows you to use your smart device
to control your washing machine and get
information about it. Thanks to the HomeWhiz
application, you can use your smart device to
carry out some procedures you can also do on
the machine. Plus, you can use some features
only with the HomeWhiz function.
To use the Bluetooth function of your machine,
you should download the HomeWhiz app from
the application store of your device.
Make sure that your smart device is connected
to internet to download the app.
If you are using the app for the first time, please
follow the on-screen instructions to complete the
user registration process. Once the registration
is complete, you can use all products with the
HomeWhiz feature in your house on this account.
On the HomeWhiz app, you can tap “Add/
Remove Appliance” to see the products paired
with your account. You can pair these products
on this page.
C
INFORMATION
• To be able to use the HomeWhiz function,
make sure that the app is installed on your
smart device and that your washing machine
is paired with your smart device via Bluetooth.
If the washing machine is not paired with your
smart device, it will function as an appliance
without the HomeWhiz feature.
• Your product will run once it is paired with
your smart device via Bluetooth. Controls
made from the app will be enabled through
this pairing. For this reason, the Bluetooth
signal between the product and the smart
device must be strong enough.
• Please visit www.homewhiz.com to see the
Android and iOS versions supported by the
HomeWhiz application.
A
WARNING!
• All the safety measures described in
"GENERAL SAFETY INSTRUCTIONS"
section of your user manual apply to remote
control through the HomeWhiz function as
well.
