75 / EN
Washer-Dryer / User Manual
C
INFORMATION
• If the selected wetness level (Iron Dry,
Cupboard Dry, Cupboard Extra Dry)
cannot be reached at the end of the drying
programme, your machine will automatically
extent the programme duration. The
programme will take longer.
• If Timed Drying is selected, the programme
will end at the end of the drying time even if
the laundry is not dry.
• If, during the drying programme, the selected
wetness level (Iron Dry, Cupboard Dry,
Cupboard Extra Dry) is reached or extra
dryness is detected in the timed drying
options, the programme will take shorter. The
time decrease will be shown on the display.
5.11.1 Auxiliary Functions
• Prewash
A Prewash is required only for heavily soiled
laundry. Not using the Prewash will save energy,
water, detergent and time.
• Fast+
You can press the Quick Wash button to
shorten the programme time after selecting the
programme. For some programmes, the time
can be shortened by over 50%. Still, for medium
and lightly soiled laundry, you will get the same
washing results in a shorter time.
Although it depends on the programme,
pressing the Quick Wash button once will
shorten the programme time down to a certain
level. Press the same button for the second time
to drop the time to the minimum level.
For better washing results, do not use the Quick
Wash button for heavily soiled laundry.
For medium and lightly soiled laundry, use the Quick
Wash button to shorten the programme time.
5.11 Auxiliary function selection
Select the desired auxiliary functions before starting
the programme. When a programme is selected,
lights of the auxiliary functions that can be selected
together with that programme will turn on.
-
-
-
-
C
INFORMATION
• Lights of the auxiliary functions that cannot
be selected together with the selected
programme will not turn on. If you press the
buttons of these auxiliary functions, you will
hear a warning and selection will be disabled.
If the washing programme has reached a point
where an auxiliary function cannot be selected,
you cannot select any function.
C
INFORMATION
• Some functions cannot be selected together.
If a second auxiliary function conflicting with
the first one is selected before starting the
machine, the function selected first will be
cancelled and the second auxiliary function
selection will remain active.
• An auxiliary function which is not compatible
with the programme cannot be selected.
(See "Programme and consumption table")
• Some programmes have auxiliary functions
that must run together with the selected
programme. These functions cannot be
cancelled. The light of the relevant auxiliary
function is already on.
