Washer-Dryer / User’s Manual
19 / EN
Installation
• In the area where this product is installed, there must not be a lockable, sliding or
hinged door that will restrict the full opening of loading door.
• Operate the product in a well ventilated and dust free environment.
• Do not place heat sources such as Hobs, Irons, Ovens, etc. on the washing machine
and do not use them on the product.
3.2 Removing packaging reinforcement
Tilt the machine backwards to remove the packaging reinforcement. Remove the
packaging reinforcement attached to the ribbon.
DANGER!
Your product is heavy. Remove packaging
reinforcement as displayed in the figure.
Be careful not to get your hand caught under the
machine during this procedure.
3.3 Removing the transit bolts
A
PRECAUTION
• Do not remove the transit bolts before removing the
packaging reinforcement.
• Remove the transit bolts before operating the washing
machine! Otherwise, the product will get damaged.
3
2
1
1 Use a tool to loosen all bolts until they rotate freely.
