9/EN
3
Installation
Product must be installed by a qualified person in
accordance with the regulations in force. The
manufacturer shall not be held responsible for
damages arising from procedures carried out by
unauthorized persons which may also void the
warranty.
Preparation of location and electrical
installation for the product is under customer’s
responsibility.
DANGER:
The product must be installed in accordance
with all local electrical regulations.
DANGER:
Prior to installation, visually check if the
product has any defects on it. If so, do not
have it installed.
Damaged products cause risks for your safety.
Before installation
The hob is designed for installation into commercially
available work tops. A safety distance must be left
between the appliance and the kitchen walls and
furniture. See figure (values in mm).
•
It can also be used in a free standing position.
Allow a minimum distance of 750 mm above the
hob surface.
•
(*) If a cooker hood is to be installed above the
cooker, refer to cooker hood manufacturer'
instructions regarding installation height (min
650 mm)
•
Remove packaging materials and transport locks.
•
Surfaces, synthetic laminates and adhesives
used must be heat resistant (100 °C minimum).
•
The worktop must be aligned and fixed
horizontally.
•
Cut aperture for the hob in worktop as per
installation dimensions.
*
Minimum height to extractor as recommend in
extractor instruction manual
**
Minimum distance between cabinetry must be
equal to width of hob
Installation and connection
•
The product must be installed in accordance with
all local gas and electrical regulations.
Do not install the hob on places with sharp
edges or corners.
There is the risk of breaking for glass ceramic
surface!
Electrical connection
Connect the product to a grounded outlet/line
protected by a miniature circuit braker of suitable
capacity as stated in the "Technical specifications"
table. Have the grounding installation made by a
qualified electrician while using the product with or
without a transformer. Our company shall not be liable
