manualshive.com logo in svg

Beko FLM SF53, Installation And Operating Manual

Share
Download
Beko FLM SF53 Installation And Operating Manual Download Page 29

EN  

Installation and operating manual

29 METPOINT

®

 SF53

6.3.1.  Entering pipe inside diameter

Setup 

→

 Sensor Setup 

→ 

Diameter

To change the unit, press the >>UP<< button to select the "Unit" 
field and confirm by pressing the >>ENTER<< button.

Press the >>UP<< button to select the desired unit and confirm 
by pressing the >>ENTER<< button 2x.

Press the >>UP<< button to select the value to be changed and 
confirm by pressing the >>ENTER<< button.

Press the >>UP<< button to enter the new value and confirm by 
pressing the >>ENTER<< button.

6.3.2.  Entering / changing consumption counter value

Setup 

→

 Sensor Setup 

→ 

Total Counter

To change the unit, press the >>UP<< button to select the "Unit" 
field and confirm by pressing the >>ENTER<< button.

Press the >>UP<< button to select the desired unit and confirm 
by pressing the >>ENTER<< button 2x.

Press the >>UP<< button to select the value to be changed and 
confirm by pressing the >>ENTER<< button.

Press the >>UP<< button to enter the new value and confirm by 
pressing the >>ENTER<< button.

NOTICE

Consumption counter value

When the consumption counter reaches 1,000,000,000 m³, it is automatically reset to 0.

Summary of Contents for FLM SF53













































Reviews:

No comments

Brands by name

Popular brands

Load more brands