background image

18 / EN

Washing Machine / User’s Manual 

4.12 End of programme

"End/Cancel" light on the programme follow-

up indicator will light up once the programme 

comes to an end; and "Door Open" symbol 

flashes for 1-2 minutes until the door is ready 

to open. When "Door Open" symbol is steadily 

illuminated, the door can be opened.

To turn off the machine, turn program 

selection knob to "On / Off" position. Take out 

your laundry and close the loading door. The 

machine will be ready for the next run.

4.13 Door Open

"Door Open" symbol is illuminated when the 

door is ready to open. It flashes until the door 

gets ready to open. If the "Door Open" symbol 

is not illuminated, do not force the door to 

open. The symbol's light is steady when the 

door is ready to open.

4.14 Your machine is equipped with a 

“Standby Mode”

In case of not starting any programme or 

waiting without making any other operation 

when the machine is turned on by On/Off 

button and while it is in selection step or if no 

other operation is performed approximately 

2 minutes after the programme you selected 

has come to an end, your machine will 

automatically switch to energy saving mode. 

Brightness of indicator lights will decrease.  

Also, if your product is equipped with a display 

showing the programme duration, this display 

will completely turn off. In case of rotating the 

Programme Selection knob or pressing any 

button, lights and display will restore to their 

previous condition. Your selections made while 

exiting the energy saving mode may change. 

Check the appropriateness of your selections 

before starting the programme. Readjust if 

necessary. This is not a fault.

Maintenance and cleaning

Service life of the product extends and 

frequently faced problems decrease if cleaned 

at regular intervals.

5.1 Cleaning the detergent drawer

Clean the detergent drawer at regular intervals 

(every 4-5 washing cycles) as shown below 

in order to prevent accumulation of powder 

detergent in time.

Press the dotted point on the siphon in the 

softener compartment and pull towards you 

until the compartment is removed from the 

machine.

C

INFORMATIONS

If more than normal amount of water and 

softener mixture starts to gather in the 

softener compartment, the siphon must be 

cleaned.

Wash the detergent drawer and the siphon 

with plenty of lukewarm water in a washbasin. 

Wear protective gloves or use an appropriate 

brush to avoid touching of the residues in the 

drawer with your skin when cleaning. Insert 

the drawer back into its place after cleaning 

and make sure that it is seated well.

5.2 Cleaning the loading door and the 

drum

For products with drum cleaning programme, 

please see Operating the product - 

Programmes.

For products without drum cleaning, follow the 

below steps to clean the drum: 

Select Additional Water or Extra Rinse auxiliary 

functions. Use a Cottons programme without 

Summary of Contents for EV 7102
























Reviews: