
22 EN
Fluff filter
Lint and fibres released from the laundry
to the air during the drying cycle are
collected in the “Fluff Filter”.
C
Such fibre and lint are generally
formed during wearing and washing.
C
Always clean the filter after each
Drying process.
C
You can clean the filter and filter area
by vacuum cleaner.
Figure 1
Figure 2
For Filter cleaning;
1. Take out the cover.
2.a If the product’s fluff filter can be
opened as shown in Figure 1, remove
the filter by pulling it up and open the
filter.
2.b If the product’s fluff filter is as shown
in Figure 2, remove the filter by pulling
it up.
3. Clean lint, fibre, and cotton raveling
on the filter and in the filter housing by
hand or with a soft piece of cloth.
4. Close the filter and place it back into
its seat.
C
Clogging may arise on the filter
surface after using your machine for
some time; if this occurs, wash the
filter with water and dry it before using
again.
8
Maintenance and cleaning
Sensor (models equipped with
a sensor)
There are humidity sensors in your
machine that detect whether the laundry
is dry or not.
For sensor cleaning;
1 Open the cover of your machine.
2 Allow the machine to cool off if drying
has been carried out.
3 Wipe the metal sensors with a soft
cloth, dampened with vinegar and dry
them.
C
Clean metal sensors 4 times a year.
A
Never use solvents, cleaning agents
or substances alike when cleaning as
these might cause fire and explosion!