Beko DV 7110, User Manual, Page: 41 / 68

41 / EN
Dryer / User Manual
5.11 Child-proof lock
There is a childproof lock to prevent any pro-
gram interruption due to the pressing of keys
while the program is on. The loading door and
all keys except the “On/Off” key on the panel
are deactivated when the child-proof lock is
active.
In order to activate the childproof lock, press
on the “Start/Pause/Cancel” and “Low tem-
perature” buttons simultaneously for 3 sec-
onds.
To start a new program after the program is
over or to interrupt the program, the child-
proof lock should be deactivated. To deacti-
vate the childproof lock, press the same but-
tons for 3 sec.
C
One of the LEDs on the program
follow-up indicator starts flashing
when the child-proof lock is acti-
vated.
C
Child-proof lock is deactivated
when the machine is restarted by
pressing the On/Off button.
5.12 Ending the program
through canceling
The program which is selected first will keep
on going even if the position of the program
selection button is changed. A new program
can be selected and started after “Program
cancel” is activated in order to change the dry-
ing program.
To cancel any selected program;
• Press “Start/Pause/Cancel” button for about
a duration of 3 seconds. The “Filter cleaning”
and “Water tank” warning LEDs as well as the
“0” warning LED on the program follow-up
indicator will light up at the end of this period
for reminding purposes.
A
As the inside of the machine will be
excessively hot when you cancel
the program while the machine is
running, activate the ventilation
program to cool it down.
A
If the machine is stopped during
any drying program, and if the posi-
tion of the program selection knob
is changed, an audio signal will be
heard (if the “Cancel audio warning”
function is not selected).
The machine will not start even if the “Start/
Pause/Cancel” button is pressed, unless the
program selection knob is returned to the
initial program. The paused program must be
cancelled in order to change the drying pro-
gram.
5.13 End of program
The “Filter cleaning” and “Water tank” warning
LEDs as well as the “0” warning LED on the
program follow-up indicator will light up at the
end of the program. The door can be opened
and the machine becomes ready for a second
cycle.
Press the “On/Off” button to shut down the
machine.
C
A 2-hour anti creasing program to
prevent laundry from creasing will
be activated if you do not take the
laundry out after the program has
come to an end.
C
Clean the filter after each drying
(please see, Filter cleaning).
C
Drain the water tank after each
drying (please see, Water tank)