background image

3 EN

 

1

 

  

 Important safety information

This section includes safety information that 

will help protection from risks of personal 

injuries or materialistic damages. Failure 

to follow these instructions shall cause 

any warranty and reliability commitment to 

become void.

General safety

•  Never place the machine on a carpet-

covered floor, otherwise, lack of airflow 

beneath the machine may cause electrical 

parts to overheat. This will cause problems 

with your machine.

•  If the power cable or mains plug is 

damaged, you must call qualified electrician 

for repair.

•  The product should not be plugged in 

during installation, maintenance and repair 

works. Such works should always be made 

by the technical service. Manufacturer 

shall not be held responsible for damages 

arising from processes carried out by any 

unauthorised persons.

•  Connect the product to a grounded outlet 

protected by a fuse of suitable capacity as 

stated in the technical specifications table.

•  Operate your product at temperatures 

b5°C and +35°C.

•  Do not use electrical devices in the product.

•  Do not connect the air exit of the product 

to the chimney holes which are used for the 

exhaust fumes of the devices operating with 

gas or other types of fuel.

•  You must provide enough ventilation in 

order to prevent gases exiting from devices 

operating with other types of fuels including 

the naked flame from accumulating in the 

room due to the back fire effect.

•  Always clean the lint filter before or after 

each loading.

• 

Never operate your dryer without the 

lint filter installed

.

•  Do not allow fibre, dust and dirt 

accumulation around the exhaust exit and 

at adjacent areas.

•  Power cable plug must be within easy 

reach after installation.

•  Do not use extension cords, multi-plugs 

or adaptors to connect the dryer to power 

supply in order to decrease the risk of 

electric shock.

•  Do not make any changes on the plug 

supplied with the product. If it is not 

compatible with the socket, have a qualified 

electrician change the socket with a 

suitable one.

•  Items cleaned or washed with gasoil/fuel oil, 

dry-laundry solvents and other combustible 

or explosive materials as well as the items 

that are contaminated or spotted with such 

materials should not be dried in the product 

since they emit flammable or explosive 

vapor.

•  Do not dry items cleaned with industrial 

chemicals in the dryer.

•  Do not dry unwashed items in the dryer.

•  Items soiled with cooking oils, acetone, 

alcohol, fuel oil, kerosene, stain remover, 

turpentine, paraffin and paraffin removers 

must be washed in hot water with plenty of 

detergent before being dried in the dryer.

•  Garments or pillows bolstered with rubber 

foam (latex foam), shower bonnets, water 

resistant textiles, materials with rubber 

reinforcement and rubber foam pads should 

not be dried in the dryer.

•  Do not use fabric softeners and anti-static 

products unless they are recommended by 

the manufacturers of the fabric softener or 

the product.

•  Oil-affected items can ignite spontaneously, 

especially when exposed to heat sources 

such as in a tumble dryer. The items 

become warm, causing an oxidation 

reaction in the oil. Oxidation creates heat. 

If the heat cannot escape, the items can 

become hot enough to catch fire. Piling, 

stacking or storing oil-affected items can 

prevent heat from escaping and so create a 

fire hazard.

•  If it is unavoidable that fabrics that contain 

vegetable or cooking oil or have been 

contaminated by hair care products be 

placed in a tumble dryer they should first be 

washed in hot water with extra detergent 

- this will reduce, but not eliminate, the 

hazard.

•  This product must be grounded. Grounding 

installation decreases the risk of electric 

shock by opening a path with low 

resistance for the electricity flow in case of 

a malfunction or failure. Power cable of this 

product is equipped with a conductor and 

a grounding plug that allows for grounding 

the product. This plug must be installed 

appropriately and inserted into a socket 

which is grounded in accordance with the 

local laws and regulations.

•  Do not install the product behind a door 

with a lock, sliding door or a door that has a 

hinge against the hinge of the dryer.

•  Do not install or leave this product in 

places where it will be exposed to outdoor 

Summary of Contents for DV 6120 X

















Reviews: