background image

13 EN

on the “Start/Pause/Cancel” and “Cancel 

audio warning” buttons simultaneously for 3 

seconds. 

To start a new program after the program is 

over or to interrupt the program, the childproof 

lock should be deactivated. To deactivate the 

childproof lock, press the same buttons for 3 

sec.

C

  Child-proof lock is deactivated when the 

machine is restarted by pressing the On/Off 

button.

C

  Press the relevant buttons for 3 seconds 

to activate the child-proof lock. A long 

beep will be heard and the child-proof lock 

will be activated. A double beep will be 

heard if you press any button or turn the 

programme selection knob while the child-

proof lock is active. Press the buttons for 3 

seconds to deactivate the child-proof lock. 

Single beep will be heard and child-proof 

lock will be deactivated.

A

 A double beep will be heard if you turn 

the programme selection knob when the 

machine is running and the child-proof 

lock is active. If you deactivate the child-

proof lock without returning the program 

selection knob to its previous position, the 

programme will be terminated since the 

position of the programme selection knob 

is changed. The drying LED turns on and 

E

N

2

H

eight (adjustable)

84,6 cm

Width

59,5 cm

Depth

53 cm

Capacity (max.)

6 kg

Weight (net)

32 kg

Voltage

See type label

R

ated power input

M

odel code

Type label is located behind the loading door.

Technical Specifications

the machine remains on hold until a new 

programme is selected and the Start button 

is pressed.

Ending the program through canceling

To cancel any selected programme;

Press “Start/Pause/Cancel” button for about 

3 seconds. The “Filter cleaning”, “Water tank” 

and “End/ Anti-creasing” warning lights will 

turn on at the end of this period for reminding 

purposes.

A

 As the inside of the dryer will be 

excessively hot when you cancel the 

programme while the dryer is running, 

activate the ventilation programme to cool 

it down.

End of program

The “End/Anti-creasing”, “Filter cleaning” and 

“Water tank” warning lights on the programme 

follow up indicator will turn on when the 

programme comes to an end. The door can 

be opened and the machine becomes ready 

for a second cycle.

Press “On/Off” button to turn off the dryer.

C

Final step of the drying cycle (cooling step) 

is performed without heat application in 

order to keep the items at a temperature 

that would not harm them.

C

A 2-hour anti creasing programme to 

prevent laundry from creasing will be 

activated if you do not take the laundry out 

after the programme has come to an end.

C

 If you will not take the laundry out 

immediately, do not stop the dryer before 

the drying process is complete.

Clean the filter after each drying (please 

see, Filter cleaning).

Drain the water tank after each drying 

(please see, Water tank)

Summary of Contents for DV 6120 X

















Reviews: