Beko DRY934C, User Manual

Page: 44 / 52

44
Dryer / User Manual
5.13 End of program
When the program ends, the Fibre Filter
Cleaning and Water Tank warning symbols
on the program observation indicator turn on.
Loading door may be opened and machine
becomes ready for another run.
To turn off the machine, press the On/Off/
Cancel button.
C
NOTE
• Wrinkle Prevention function activates the 2
hour-Wrinkle Prevention program if laundry
isn’t taken out of machine after completion
of the program.
• Clean the fibre filter after each drying. See
6.1 Cleaning Lint Filter / Loading Door Inner
Surface
• Empty the water tank after each drying.
See 6.3 Draining the water tank
C
NOTE
• Adding laundry after the drying operation
starts may cause the dried laundry inside
the machine to mix with wet laundry and
leave the laundry damp at the end of
operation.
• Adding or removing laundry during drying
may be repeated as many times as you
wish. But this operation continuously
interrupts the drying operation, and thus
increases program duration and energy
consumption. So, it is recommended to
add laundry before the program starts.
• If a new program is selected by turning the
program selection knob while the machine
is in stand-by; the running program
terminates and new program information is
displayed on the screen.
WARNING!
• Do not touch the inner surface of the drum
while adding or removing clothes during a
continuing program. The drum surface is
hot.
5.12 Cancelling the program
If you want to cancel the program and
terminate the drying operation for any reason
after the machine starts running, keep the On/
Off/Cancel button pressed for 3 seconds.
A
WARNING!
• The inside of the machine shall be
extremely hot when you cancel the
program during machine operation, so run
the ventilation program to allow it to cool
down.