
EN / 50
Dryer / User Manual
6
Maintenance and cleaning
Service life of the product extends and
frequently faced problems decrease if
cleaned at regular intervals.
B
This product must be unplugged
during maintenance and cleaning
works (control panel, body, etc.).
6.1 Cleaning Lint Filter /
Loading Door Inner Surface
Lint and fibres released from the laundry to
the air during the drying cycle are collected in
the Lint Filter.
C
*Such fibre and lint are generally
formed during wearing and
washing.
A
Always clean the lint filter and the
inner surfaces of the loading door
after each drying process.
C
You can clean the lint filter
housing with a vacuum cleaner.
To clean the lint filter:
1. Open the loading door.
2. Remove the lint filter by pulling it up and
open the lint filter.
3. Clean lint, fibre, and cotton raveling by
hand or with a soft piece of cloth.
4. Close the lint filter and place it back into
its housing.
C
A layer can build up on the
lint filter pores that can cause
clogging of the lint filter after
using the machine for a while.
Wash the lint filter with warm
water to remove the layer that
builds up on the lint filter surface.
Dry the lint filter completely
before reinstalling it.
C
Clean the entire inner surface of
the loading door and loading door
gasket.
Summary of Contents for DPU 7440
Page 1: ...DPU 7440 2960310852_IT 251215 1924 Asciugatrice Manuale Utente IT EN ...
Page 29: ...Dryer User Manual EN ...
Page 56: ......