Beko DPU 7440, User Manual, Page: 40 / 56

EN / 40
Dryer / User Manual
• Leave at least 3 cm of space around the
sides and the rear wall of the product
when installing it under a counter or in a
cupboard.
3.4 Adjusting the feet
In order to ensure that the product operates
more silently and vibration-free, it must
stand level and balanced on its feet. Balance
the machine by adjusting the feet.
Turn the feet to left or right until the
machine stands level and firmly.
C
Never remove the adjustable feet
from their housings.
3.5 Electrical connection
For specific instructions for electrical
connection required during installation (see
1.1.1 Electrical Safety)
3.6 First use
Before starting to use the product, make sure
that all preparations are made in accordance
with the instructions in sections "Important
safety instructions" and "Installation".
3.7 Transportation of the
product
1. Unplug the product before transporting
it.
2. Remove the water drain (if any) and
chimney connections.
3. Drain the water in the product
completely.
A
We recommend carrying the
product in upright position. If it is
not possible to carry the machine
in the upright position, we
recommend carrying it by tilting
towards the right side when
looked from the front. After the
product is moved to its new place,
you should wait for 12 hours
before starting it.
3.8 Warnings about sounds
C
It is normal to hear metallic noise
from the compressor sometimes
during operation.
C
Water collected during operation
is pumped to water tank. It is
normal to hear pumping noise
during this process.
3.9 Changing the illumination
lamp
In case an illumination lamp is used in your
laundry dryer
To change the Bulb/LED used for illumination
of your tumble dryer, call your Authorized
Service. The lamp(s) used in this appliance is
not suitable for household room illumination.
The intended purpose of this lamp is to as-
sist the user to place laundry in the tumble
dryer in a comfortable way. ‘’The lamps used
in this appliance have to withstand extreme
physical conditions such as vibrations and
temperatures above 50 °C.’’