Beko DP 109, Instructions For Installation And Operation Manual, Page: 10 / 50

Connection to the DD 109 data display unit
10 DP 109
6
Connection to the DD 109 data display unit
6.1 Connection via connecting plug
For the complete METPOINT DPM stationary, only connect the cable of the data display unit with the
connection of the dew point sensor.
6.2 Connection of a dew point sensor to the data display unit
Dew point sensor 1
Connection "I"
Analogue output connection "I"
6.3 Connection of two dew point sensors to the data display unit
Dew point sensor 1
Connection "I"
Analogue output connection "I"
Dew point sensor 2
Connection "G"
Analogue output connection "G"
Please use the configuration software to add new sensors or to change the sensor settings to the DD 109
unit.