Beko DN161220DX, User Manual

Page: 10 / 38

EN
9
3 Installation
B
In case the information which are given
in the user manual are not taken into
account, manufacturer will not assume
any liability for this.
Points to be paid attention
to when the relocation of the
refrigerator
1.
Before transportation of your refrigerator, it
should be emptied and cleaned.
2.
Before it is re-packaged, shelves,
accessories, crisper, etc. inside your
refrigerator should be fixed with adhesive tape
and secured against impacts.
3.
Package should be bound with a thick
tape or sound ropes and the transportation
rules on the package should be strictly
observed.
Do not forget...
Any recycled substance is an indispensable
matter for nature and our national asset
wealth.
If you want to contribute to the re-
evaluation of the packaging materials,
you can consult to your environmentalist
organizations or the municipalities where
you are located.
Before you start the
refrigerator,
Check the following before you start to
use your refrigerator:
1.
Is the inside of the refrigerator dry and free
air circulation available behind it?
2.
Attach 2 plastic wedges as illustrated
below. Plastic wedges is intended to keep the
distance which will ensure the air circulation
between your refrigerator and the wall. (The
picture is drawn up as a representation and it
is not identical with your product.)
3.
Clean the inside of the refrigerator as
recommended in the “Maintenance and
cleaning”.
4.
Plug in the refrigerator to the wall outlet.
When the fridge door is opened, fridge internal
lamp will turn on.
5.
When the compressor starts to operate,
a sound will be heard. The liquid and gases
sealed within the refrigeration system may also
give rise to noise, even if the compressor is
not running and this is quite normal.
6.
Front edges of the refrigerator may feel
warm. This is normal. These areas are
designed to be warm to avoid condensation.